Underwater Radiated Noise: What Measurement Books
A proposal to the IMO aims to make underwater noise measurement practical for the world fleet. What it means for chandlers, agents and repair yards.
Shipowners may soon be able to prove a vessel's underwater radiated noise level without a bespoke, port-side measurement campaign. A proposal co-sponsored with ICS, IPTA and RINA asks the IMO to make underwater radiated noise (the sound a ship's hull, propeller and machinery push into the sea) measurement practical and affordable for the world fleet, according to Hellenic Shipping News (November 2026). For chandlers, agents, repair yards and marine service companies, the commercial question is narrower: if a noise baseline becomes routine paperwork, it also becomes a dock visit, a survey slot and a set of approved documents attached to a port call.
What the proposal actually asks for
The sponsors want the IMO to accept measurement methods that most owners can afford. The current guidance prefers direct measurement to set a ship's noise baseline, and class society quiet ship notations normally require it, per Hellenic Shipping News (November 2026).
That is where the cost sits. Direct measurement means a survey vessel, a hydrophone array, a defined water depth and a sea state that cooperates. Doing it once per ship is a project. Doing it across a fleet is a budget line.
The proposal goes to MEPC 85, the IMO's Marine Environment Protection Committee session where member states settle environmental guidance. The paper was co-sponsored with the International Chamber of Shipping, the International Parcel Tankers Association and RINA, the classification society.
Why noise measurement has become a compliance topic
Noise is no longer only a marine-biology concern. It is being folded into the same evidence chain as emissions and fuel reporting.
- Class notations already reward quieter ships, and those notations need a baseline.
- Ports and coastal states increasingly ask for acoustic evidence in permits and incentive schemes.
- Charterers with green procurement criteria ask for documentation, not just a claim.
The measurement methods matter because noise depends on speed, draught and loading. A 2016 study in the IEEE Journal of Oceanic Engineering analysed measured spectra from commercial vessels and found that source-level models tuned on older ships may no longer apply to modern commercial vessels, as the paper's abstract states (IEEE Journal of Oceanic Engineering, 2016). A baseline taken at one speed and draught does not describe the same ship at another.
Field measurements back that up. Research published in Marine Pollution Bulletin used a cabled ocean observatory to measure noise from identified ship passages and found similar variation patterns when ships travelled on similar courses, but different patterns on different courses, according to the paper's abstract (Marine Pollution Bulletin, 2020).
The compliance calendar is filling up
Noise is arriving alongside a crowded regulatory queue, and suppliers who track one deadline usually track them all.
From 1 January 2027 the EU Emissions Trading System extends to offshore vessels of 5,000 GT or above, and since 1 January 2026 the maritime scope has covered methane and nitrous oxide as well as CO2, according to Hellenic Shipping News (November 2026). Offshore support vessels are exactly the fleet segment most exposed to noise scrutiny near cable routes and marine protected areas.
The IMO's net-zero framework is still being negotiated. Norway has proposed a redesign of the framework combining additional surplus units for zero- and near-zero fuels, five-year banking and broader use of surplus across both compliance tiers, according to Hellenic Shipping News (November 2026). Every one of those mechanisms needs verified ship-level data.
Onboard carbon capture is moving the same way. A Korean public-private partnership of ten maritime organisations had its proposal selected as the base document for IMO safety guidelines on onboard carbon capture and storage systems, per Hellenic Shipping News (November 2026). Fitting that equipment is yard work with a survey and documentation trail attached.
Where the commercial work lands for service providers
Nothing in the proposal creates a new certificate overnight. The effect is on how owners plan dockings and how they choose suppliers who can support the paperwork.
Ship repair yards and dry-dock planners
A noise baseline taken in service, a propeller polish, a hull coating change or a machinery isolation fix all need a slot. Yards that can quote measurement support alongside the docking win the package rather than the hull clean alone. Our guide to what drives the cost of ship repairs in a dry docking sets out how those packages are usually scoped, and VesselReach for ship repair yards shows how to find the vessels that need them.
Port agents
Survey vessels, hydrographic launches and measurement teams need clearances, berth windows and shore support. An agent who can arrange a short alongside period for a measurement team is selling something a generic port call does not include. VesselReach for port agents helps identify those calls early.
Ship chandlers and marine service companies
Quiet-vessel work pulls in insulation, flexible mounts, propeller coatings and specialist consumables. Chandlers who already stock or source those items can attach them to a routine call instead of losing the line to a specialist. VesselReach for ship chandlers connects those opportunities to the right buyer.
Bunker suppliers
Fuel choice feeds noise and emissions evidence at the same time. Suppliers who can document the fuel actually delivered, and its specification, make the owner's compliance file easier to close.
How to respond before MEPC 85
- List the vessels you already serve that carry, or are candidates for, a quiet ship notation.
- Ask which of those have a docking or major repair inside the next two years.
- Build a short service sheet covering measurement support, propeller work and acoustic consumables.
- Record who signs off technical and purchasing decisions at each manager, not just the superintendent on the last call.
Timing matters more than volume. A yard that reaches the technical superintendent six months before a docking is competing on capability; one that calls after the specification is written is competing on price.
How VesselReach helps
Compliance work starts with knowing which ships are heading to your ports and who decides on them. VesselReach detects vessels near your selected ports and those scheduled or expected to arrive, then uses AI to identify the company behind each vessel.
- Decision-maker discovery finds technical, purchasing, fleet and C-suite contacts by role, which means your measurement or docking proposal reaches the person who signs it.
- Staged multichannel outreach across email, WhatsApp and phone, with automated follow-ups, which means a docking enquiry sent months ahead stays in view.
- AI enquiry handling answers routine questions from approved information and escalates to your team when it cannot, which means a superintendent's technical question gets a human answer.
Book a VesselReach demo and we will map the workflow to the ports you actually serve.
Frequently asked questions
How can ship chandlers prepare for underwater noise measurement requirements?
Chandlers can identify vessels with quiet ship notations or upcoming dockings, stock acoustic consumables such as insulation and flexible mounts, and use VesselReach to reach technical superintendents before specifications are written.
What does the IMO proposal mean for port agents?
Port agents may see more survey vessels and measurement teams needing berth windows and shore support. Agents who can arrange short alongside periods for these teams can offer a service beyond a standard port call.
Why is underwater noise measurement a compliance issue for shipowners?
Class notations and port incentive schemes increasingly require acoustic evidence. The IMO proposal aims to make measurement affordable, which would turn noise baselines into routine documentation similar to emissions reporting.
How does VesselReach help maritime service providers win noise-related work?
VesselReach identifies vessels near your ports, finds the right company and decision-makers by role, and supports staged outreach across email, WhatsApp and phone with automated follow-ups and AI enquiry handling.
Key facts
- According to Hellenic Shipping News (November 2026), a proposal co-sponsored with the International Chamber of Shipping (ICS), the International Parcel Tankers Association (IPTA) and RINA asks the International Maritime Organization (IMO) to make underwater radiated noise measurement practical and affordable for the world fleet. Hellenic Shipping News
- According to Hellenic Shipping News (November 2026), current guidance prefers direct measurement to set a ship's noise baseline, and class society quiet ship notations normally require it. Hellenic Shipping News
- According to the paper's abstract, a 2016 study in the IEEE Journal of Oceanic Engineering analysed measured spectra from commercial vessels and found that source-level models tuned on older ships may no longer apply to modern commercial vessels. IEEE Journal of Oceanic Engineering
- According to the paper's abstract, research published in Marine Pollution Bulletin (2020) used a cabled ocean observatory to measure noise from identified ship passages and found similar variation patterns when ships travelled on similar courses, but different patterns on different courses. Marine Pollution Bulletin (Elsevier BV)
- According to Hellenic Shipping News (November 2026), the EU Emissions Trading System extends to offshore vessels of 5,000 GT or above from 1 January 2027, and since 1 January 2026 the maritime scope has covered methane and nitrous oxide as well as CO2. Hellenic Shipping News
Frequently asked questions
How can ship chandlers prepare for underwater noise measurement requirements?
Chandlers can identify vessels with quiet ship notations or upcoming dockings, stock acoustic consumables such as insulation and flexible mounts, and use VesselReach to reach technical superintendents before specifications are written.
What does the IMO proposal mean for port agents?
Port agents may see more survey vessels and measurement teams needing berth windows and shore support. Agents who can arrange short alongside periods for these teams can offer a service beyond a standard port call.
Why is underwater noise measurement a compliance issue for shipowners?
Class notations and port incentive schemes increasingly require acoustic evidence. The IMO proposal aims to make measurement affordable, which would turn noise baselines into routine documentation similar to emissions reporting.
How does VesselReach help maritime service providers win noise-related work?
VesselReach identifies vessels near your ports, finds the right company and decision-makers by role, and supports staged outreach across email, WhatsApp and phone with automated follow-ups and AI enquiry handling.
Sources
- Making underwater radiated noise measurement practical for the world fleet, Hellenic Shipping News, 13 November 2026
- EU Emission Trading System applying to offshore vessels from 1 January 2027, Hellenic Shipping News, 13 November 2026
- Korean partnership’s carbon capture proposal selected as basis for IMO’s future safety guidelines, Hellenic Shipping News, 12 November 2026
- Norway’s IMO proposal: will more flexibility create a functioning surplus market?, Hellenic Shipping News, 10 November 2026
- Parametric Analysis of Ship Noise Spectra, IEEE Journal of Oceanic Engineering, 11 August 2016
- Measurements of underwater noise radiated by commercial ships at a cabled ocean observatory, Marine Pollution Bulletin (Elsevier BV), 12 February 2020
Underwater radiated noise is the sound a ship pushes into the sea, and proving it is measured is becoming part of the compliance file owners keep for class societies, ports and charterers. A proposal to the IMO's MEPC 85, co-sponsored with ICS, IPTA and RINA, aims to make that measurement practical and affordable for the whole fleet instead of a bespoke project per ship. For service providers the work is ordinary: a survey slot, a docking, propeller and coating work, acoustic consumables and clearances for a measurement team. Offshore vessels face the same squeeze from 2027, when the EU ETS extends to units of 5,000 GT and above. Yards and agents that reach technical and purchasing contacts before the specification is written compete on capability rather than price.
What is underwater radiated noise? It is the sound a ship's hull, propeller and machinery push into the sea, and class societies normally want a measured baseline before granting a quiet ship notation. What is ship repair and maintenance work around noise? Mostly ordinary yard jobs: a propeller polish, a hull coating change or a machinery isolation fix, each needing a docking slot and a survey trail. Why does timing matter? A yard that reaches the technical superintendent six months before a docking competes on capability; one that calls after the specification is written competes on price.
A measurement slot is not a certificate. It means a survey vessel, a hydrophone array, a defined water depth and a sea state that cooperates, which is why the IMO proposal co-sponsored with ICS, IPTA and RINA matters to anyone quoting the work. Quiet ship notation from a class society normally needs that measured baseline first. Because noise shifts with speed, draught and loading, one reading does not cover the ship, so propeller work, hull coating changes and machinery isolation fixes tend to be scoped alongside the survey rather than after it.
Quiet ship notations sit inside a wider compliance queue that maritime suppliers already track. The International Maritime Organization (IMO) is weighing a proposal at MEPC 85, co-sponsored with the International Chamber of Shipping, the International Parcel Tankers Association and RINA, on cheaper noise measurement. Offshore support vessels face a second deadline: the EU Emissions Trading System covers units of 5,000 GT and above from 1 January 2027. Norway has proposed redesigning the IMO net-zero framework, and a Korean public-private partnership of ten maritime organisations had its onboard carbon capture proposal chosen as the base for IMO safety guidelines. Each mechanism needs verified ship-level data, which is why repair yards, port agents and chandlers see survey slots and documentation requests attached to ordinary port calls.
This article was written with AI assistance from the sources listed above. Facts are linked to their original publishers; please consult the sources before acting on them.
