Quiet Ship Notation: What It Measures | VesselReach
Quiet ship notation explained: which class societies offer it, what an acoustic survey slot involves, and how repair yards quote a noise measurement package.
Quiet ship notation is a voluntary class society mark that confirms a vessel’s noise emissions have been measured and, where required, limited to specified levels. It matters to service providers because earning or keeping the notation depends on measurement work that is often scheduled around a docking, and that work needs a yard, an acoustic surveyor and a plan.
The notation is not a single global standard. Class societies have introduced their own rules, and the measurement process they rely on is still being made practical for the world fleet, according to Hellenic Shipping News (November 2026).
What quiet ship notation actually covers
Quiet notation comes in two broad families: underwater radiated noise and airborne noise. Both are voluntary, and both are aimed at reducing the noise a ship sends into the water or the air around a port.
A 2026 review in the Journal of Marine Engineering & Technology found that since 2019 several classification societies, including RINA, DNV, Lloyd’s Register, Bureau Veritas and the Korean Register, have introduced notations aimed at minimising airborne noise emissions from ships, particularly in port areas at low or zero speed (Taylor & Francis).
Underwater radiated noise is the other half. A 2022 paper in the Journal of the Society of Naval Architects of Korea notes that the IMO standardised the underwater radiated noise measurement process for commercial ships in deep seas through ISO 17208-1, and that classification societies responded with their own notations (Journal of the Society of Naval Architects of Korea).
For a shipyard or marine service company, the practical difference is where the work happens. Airborne noise is measured around the ship, often at the berth. Underwater radiated noise is measured in the water, usually on a defined acoustic range or during a sea trial.
Which class societies offer a quiet notation
Several major societies publish a quiet notation, and the list has grown since 2019. The 2026 review names RINA, DNV, Lloyd’s Register, Bureau Veritas and the Korean Register as societies that introduced airborne noise notations (Taylor & Francis).
DNV’s rule is listed in the review as “Part 6, Chapter 7, Section 8 – External Airborne Noise Emission – QUIET”, and RINA’s as “Noise Emissions in Port Area Outboard and Inboard” (Taylor & Francis). Lloyd’s Register’s procedure for determining airborne noise emissions dates from 2019 (Taylor & Francis).
For underwater noise, the notation usually follows the ISO 17208-1 measurement approach, and the class society sets the limit and the survey requirements (Journal of the Society of Naval Architects of Korea).
What an acoustic survey slot involves
An acoustic survey slot is the time a vessel, a survey team and a measurement range are reserved together. It is not a dock booking on its own, and it usually needs the ship in a specific condition.
The IMO’s revised guidelines prefer direct measurement to establish a ship’s underwater radiated noise baseline, and class society quiet notations normally require it, according to Hellenic Shipping News (November 2026). That means the measurement is the evidence, not an optional extra.
A practical slot typically covers:
- Instrumentation and calibration before the vessel sails, including hydrophones and reference sensors.
- A defined run at specified speed and water depth, following the ISO 17208-1 approach (Journal of the Society of Naval Architects of Korea).
- Data processing to separate ship noise from ambient noise, which is where signal processing matters.
- A report the class society can accept as evidence for the notation.
Ambient noise is the background sound of the sea, and separating it from the ship’s signature is a technical task. A 2021 paper in IEEE Access describes a generative adversarial network trained to remove underwater ambient noise and recover underlying ship-engine data, reporting improvements in signal-to-noise ratio and related measures (IEEE Access). That kind of processing is what turns a raw recording into a number a class society can use.
How yards quote a noise measurement package
A yard quotes a noise measurement package by scoping the measurement separately from the docking work. The two are linked, but they carry different risks and different subcontractors.
For the docking side, the yard prices the usual items: dock or slipway time, staging, hull access, and any work needed to expose or protect the areas around the measurement points. For the acoustic side, the yard either subcontracts a specialist survey team or works with the owner’s nominated surveyor.
Three recent out-of-drydock propeller repairs in Spain, Portugal and Denmark, reported by The Maritime Executive (November 2026), show the kind of in-water work that can sit alongside a noise survey. In-water services are increasingly used to avoid a full drydocking, according to gCaptain (November 2026).
For a quote, the yard should state clearly:
- What is included in the dock or in-water package.
- Who supplies the acoustic survey team and the instrumentation.
- How many measurement runs are allowed for in the price.
- What happens if weather or ambient noise forces a re-run.
- Which report format the class society requires.
The wider repair market is moving. CVC DIF completed a majority stake acquisition in Spanish repair yard Cernaval at Campamento in the Port of Algeciras Bay, according to Splash247 (October 2026) and Seatrade Maritime News (October 2026). Scottish-headquartered Dales Marine Services has launched an international mobile engineering service that sends repair teams to vessels, according to MarineLink (November 2026). Both point to more competition for specialised work, including measurement support.
Why this matters for chandlers, agents and service companies
A noise measurement slot creates a short, predictable window of demand. The vessel is in port, the technical superintendent is on board or nearby, and the yard needs support services.
Chandlers can supply consumables for the survey team and the crew. Port agents can coordinate the surveyor’s access, permits and berth changes. Marine service companies can offer staging, small fabrication and calibration support. The key is knowing the slot exists before the vessel arrives, not after the surveyor is already on the quay.
Survey work is also becoming more standardised. GlobalBQS went live on 2 November 2026 with a platform that brings one standard to bunker quantity surveys and on-/off-hire surveys, according to Hellenic Shipping News (November 2026). The same pressure for consistent, comparable survey data applies to acoustic measurement.
How VesselReach helps
Noise measurement slots are booked against vessel arrivals, so the earlier a service company sees the call, the earlier it can quote. VesselReach is built for that.
- Vessel intelligence: VesselReach shows vessels near your selected ports and scheduled arrivals, which means you can spot a repair or survey call before the ETA.
- Decision-maker discovery: VesselReach finds the technical superintendent, fleet manager or procurement contact behind the vessel, so your quote reaches the person who books the slot.
- Multichannel outreach: VesselReach runs staged email, WhatsApp and phone outreach, which means your yard or service team can follow up without chasing the same contact twice.
If your sales depend on vessels calling at specific ports, book a VesselReach demo and see the workflow on your own ports.
Frequently asked questions
What is a quiet ship notation?
A quiet ship notation is a voluntary class society mark confirming a vessel’s noise emissions have been measured and, where required, limited to specified levels. It can cover airborne noise in port or underwater radiated noise, and the rules differ by society. Source: Journal of Marine Engineering & Technology (Taylor & Francis)
Which class societies offer a quiet notation?
RINA, DNV, Lloyd’s Register, Bureau Veritas and the Korean Register are among the societies that introduced airborne noise notations from 2019, according to a 2026 review in the Journal of Marine Engineering & Technology. Source: Journal of Marine Engineering & Technology (Taylor & Francis)
What does an acoustic survey slot involve?
An acoustic survey slot reserves vessel time, a survey team and a measurement range. It typically covers instrumentation and calibration, a defined run at specified speed and depth, data processing to separate ship noise from ambient noise, and a report the class society can accept. Source: Journal of the Society of Naval Architects of Korea
How does a shipyard quote a noise measurement package?
A yard quotes the docking or in-water work separately from the acoustic survey. The quote should state who supplies the survey team and instrumentation, how many measurement runs are allowed, what happens if a re-run is needed, and which report format the class society requires.
How can a marine service company find vessels that need noise measurement?
VesselReach shows vessels near your selected ports and scheduled arrivals, then identifies the company and decision-makers behind each vessel. That lets a service company quote a survey or repair slot before the vessel arrives, rather than after the work is already booked.
Sources
- Underwater Ambient-Noise Removing GAN Based on Magnitude and Phase Spectra, IEEE Access, 1 January 2021
- Airborne noise from ships: a comparative review of classification society regulations and evaluation methods, Journal of Marine Engineering & Technology (Taylor & Francis), 16 January 2026
- Analysis of Underwater Radiated Noise in Accordance with the ISO Standard and Class Notations Using the Hybrid Sound Propagation Model, Journal of the Society of Naval Architects of Korea, 15 December 2022
- Making underwater radiated noise measurement practical for the world fleet, Hellenic Shipping News, 13 November 2026
- Dales Marine Services Launches International Mobile Ship Repair Services, MarineLink, 3 November 2026
- CVC takes majority stake in Spanish ship repair yard Cernaval, Splash247, 30 October 2026
- Three Out-of-Drydock Underwater Propeller Repairs Across Europe, The Maritime Executive, 1 November 2026
- How In-Water Services Are Optimizing Vessel & Infrastructure Repair, gCaptain, 9 November 2026
- GlobalBQS launches One Standard For Every Bunker And On-/Off-Hire Survey, Hellenic Shipping News, 6 November 2026
- CVC DIF completes acquisition of Spanish repair yard Cernaval, Seatrade Maritime News, 29 October 2026
A quiet ship notation is a voluntary class society mark confirming a vessel’s noise emissions have been measured and limited to set levels. It covers either airborne noise in port or underwater radiated noise. RINA, DNV, Lloyd’s Register, Bureau Veritas and the Korean Register have introduced notations since 2019. The measurement work is often scheduled around a docking or an in-water slot, which is why repair yards and marine service companies need to quote it early. A yard should separate the docking price from the acoustic survey price and state who supplies the instrumentation and how many runs are allowed. Finding the vessel before the slot is booked is the commercial step.
Buyers searching for a quiet ship notation definition want the scope first: it is a voluntary class society mark, split into airborne noise measured around the ship at the berth and underwater radiated noise measured in the water. The underwater radiated noise IMO baseline comes from direct measurement under ISO 17208-1, and the class society sets the limit and survey requirements. For ship repair and maintenance planning, the acoustic survey is priced apart from the docking, so a yard should state who supplies the instrumentation, how many runs are included and what happens if ambient noise forces a re-run. Service companies that see the call before the slot is booked quote first.
Related searches: underwater radiated noise imo underwater radiated noise definition ship repair and maintenance ship repair companies underwater radiated noise guidelines
This article was written with AI assistance from the sources listed above. Facts are linked to their original publishers; please consult the sources before acting on them.
