← All blogs

Additive Manufacturing Marine Parts: Yard Work

ABS and Radian Forge will qualify wire arc additive manufacturing for marine parts. Here is what that means for repair yards, chandlers and port agents.

ABS and Radian Forge signed a joint development project in November 2026 to test whether digital manufacturing data can qualify metal components made by wire arc additive manufacturing. For maritime service providers, the practical effect is that some spare parts may be produced on demand instead of ordered from a foundry and shipped to the vessel.

The project, reported by Hellenic Shipping News on 12 November 2026, focuses on confidence in the consistency and performance of additively manufactured metal parts. That is the gate that matters for yards and suppliers: a part is only useful at a port call if the class society accepts it.

What ABS and Radian Forge are actually testing

They are testing the qualification route, not the printing process itself. Wire arc additive manufacturing (WAAM, a robotic welding process that builds metal parts layer by layer) is already used for large metal components. The open question is how digital manufacturing data proves a part meets class rules.

A 2026 study in IEEE Transactions on Automation Science and Engineering describes WAAM as suited to large-scale metal components with high deposition rates and material efficiency, and argues that in-process monitoring is essential for geometric accuracy and final-part quality. That is the technical problem the ABS project is trying to solve at the qualification level.

Earlier work in Procedia Structural Integrity examined a nickel aluminium bronze propeller built by WAAM and assessed its fitness for service against classification society rules. The paper notes that class rules and standards for additive materials have been published, which is why the next step is data, not principle.

Why this matters at a port call

Spare-part availability is a scheduling problem at every dry dock and repair berth. A part that arrives late extends the vessel's stay, and that changes the agent's husbandry plan, the yard's berth allocation and the chandler's delivery schedule.

Additive manufacturing changes the lead time for certain metal components. Instead of waiting for a casting or forging, a yard with a WAAM cell could produce a replacement closer to the vessel. The ABS project matters because it tests whether the digital record of that build can satisfy the surveyor.

The same logic appears in adjacent marine technology. A 2020 review in IEEE Access notes that 3D printing has been applied in the maritime industry among others, because it can produce complex structures at reduced cost and with less wasted material. That is a general finding about the technology, not a claim about any specific yard.

Where the commercial work lands for service providers

The first commercial effect is not a wave of printed propellers. It is a change in how repair specifications and spare-part enquiries are written. Yards that can offer an additive option, or that can document why a conventional part is required, will answer PDA (pro forma disbursement account, the cost estimate an agent sends before a port call) questions faster.

  • Ship repair yards: track which class societies accept which additive routes, and price the survey time as well as the part.
  • Ship chandlers: expect more enquiries for small metal items where a printed replacement is proposed; confirm the acceptance route before quoting.
  • Port agents: build the additive option into the husbandry timeline so the surveyor's attendance is booked with the part.
  • Marine service companies: offer documentation support for digital manufacturing records, which is the part of the workflow the ABS project is testing.

The context is a fleet that is already experimenting with new technology. At a Seatrade Maritime round table in Dubai in November 2026, executives from Maersk, DP World and other carriers met to discuss Red Sea disruption, port bottlenecks and crew recruitment, according to Seatrade Maritime News. Resilience in the supply chain is the theme that additive manufacturing speaks to.

What else is moving in the same direction

Digital data exchange is spreading across maritime operations. The Tripartite Joint Industry Working Group, chaired by BIMCO, released two frameworks to improve the exchange of operations and emissions data, The Maritime Executive reported on 28 October 2026. The same habit of trusting a digital record is what the ABS project needs for parts.

Port equipment is also becoming more data-rich. TTI Algeciras ordered 21 Kalmar hybrid straddle carriers for delivery in Q4 2027, Hellenic Shipping News reported on 12 November 2026. Terminal equipment orders of that size change the maintenance and spare-part demand at the terminal, which is separate from ship repair but uses the same supplier base.

Further afield, Konecranes won its first order for a factory-new mobile harbour crane in Peru, for the Port of Matarani, with the equipment expected to be operational by the end of Q1 2027, according to Hellenic Shipping News. Each new crane or carrier creates a maintenance schedule that port service companies can quote for.

What to do before the next repair specification

  1. Check which class societies your regular yards work with, and whether they have published additive acceptance routes.
  2. Add a line to the repair specification asking whether an additive route is proposed, and who signs it off.
  3. Keep the digital build record with the part documentation, because that is what the surveyor will ask for.
  4. Price the survey attendance in the PDA, not just the part, so the estimate holds.

For a wider view of how newbuild demand feeds repair work, see what the newbuild orderbook means for ship repair.

How VesselReach helps

Repair and spare-part opportunities are tied to specific vessels at specific ports, and the buying decision sits with technical and purchasing roles. VesselReach turns vessel movements into those conversations.

  • Vessel intelligence: see vessels near your selected ports and scheduled arrivals, which means you can approach the technical manager before the repair specification is fixed.
  • Decision-maker discovery: find technical superintendents, fleet managers and procurement contacts by role, which means your additive-part proposal reaches the person who writes the specification.
  • Multichannel outreach: staged email, WhatsApp and phone contact, which means follow-up happens while the vessel is still in the region.

Book a VesselReach demo to see which vessels are heading for your ports and who to contact about them.

Key facts

  • ABS and Radian Forge signed a joint development project in November 2026 to test whether digital manufacturing data can qualify metal components made by wire arc additive manufacturing, according to Hellenic Shipping News (November 2026). Hellenic Shipping News
  • A 2026 study in IEEE Transactions on Automation Science and Engineering describes wire arc additive manufacturing as suited to large-scale metal components with high deposition rates and material efficiency, and argues that in-process monitoring is essential for geometric accuracy and final-part quality. IEEE Transactions on Automation Science and Engineering
  • Earlier work published in Procedia Structural Integrity examined a nickel aluminium bronze propeller built by wire arc additive manufacturing and assessed its fitness for service against classification society rules, noting that class rules and standards for additive materials have been published. Procedia Structural Integrity (Elsevier BV)
  • A 2020 review in IEEE Access notes that 3D printing has been applied in the maritime industry among others, because it can produce complex structures at reduced cost and with less wasted material. IEEE Access
  • TTI Algeciras ordered 21 Kalmar hybrid straddle carriers for delivery in Q4 2027, Hellenic Shipping News reported in November 2026. Hellenic Shipping News

Frequently asked questions

What is wire arc additive manufacturing in ship repair?

Wire arc additive manufacturing (WAAM) is a robotic welding process that builds metal parts layer by layer. A 2026 study in IEEE Transactions on Automation Science and Engineering describes WAAM as suited to large metal components with high deposition rates and material efficiency, though in-process monitoring is needed for geometric accuracy and final-part quality. Source: IEEE Transactions on Automation Science and Engineering

Why are ABS and Radian Forge working on digital qualification for additive manufacturing?

ABS and Radian Forge signed a joint development project in November 2026 to test whether digital manufacturing data can qualify metal components made by wire arc additive manufacturing. The project tests the qualification route rather than the printing process, focusing on confidence in the consistency and performance of additively manufactured metal parts. Source: Hellenic Shipping News

Have additive manufactured marine parts been assessed against class rules?

Yes. A paper in Procedia Structural Integrity examined a nickel aluminium bronze propeller built by WAAM and assessed its fitness for service against classification society rules. The paper notes that class rules and standards for additive materials have already been published, which is why the next step for the industry is data, not principle. Source: Procedia Structural Integrity (Elsevier BV)

How should a ship chandler respond to an additive part enquiry?

A ship chandler should confirm the acceptance route with the class society and the repair yard before quoting, and include survey attendance in the cost estimate. A printed part is only usable at the port call if the surveyor accepts the digital build record, so the acceptance route decides whether the quote holds.

What should a repair specification ask about additive manufactured parts?

A repair specification should ask whether an additive route is proposed and who signs it off. The digital build record must be kept with the part documentation, because that is what the surveyor will ask for, and survey attendance should be priced in the PDA rather than the part alone.

Does additive manufacturing remove the need for spare-part logistics?

No. Additive manufacturing changes the lead time for certain metal components, but yards still need the digital build record, the survey attendance and the delivery plan. Many parts will continue to come from conventional casting or forging, and a late part still extends the vessel's stay and shifts the husbandry plan.

Sources

  1. ABS and Radian Forge Collaborate on Digital Qualification for Additive Manufacturing, Hellenic Shipping News, 12 November 2026
  2. Seatrade Maritime Club convenes senior industry leaders in Dubai to address resilience, competitiveness and talent in shipping, Seatrade Maritime News, 12 November 2026
  3. TTI Algeciras deepens long-term partnership with Kalmar through repeat order of 21 hybrid straddle carriers, Hellenic Shipping News, 12 November 2026
  4. Konecranes gains ground in Peru with order for ESP.6 mobile harbor crane, Hellenic Shipping News, 12 November 2026
  5. Maritime Industry Advances Harmonisation of Digital Emissions Reporting, The Maritime Executive, 28 October 2026
  6. Antenna Design Using Modern Additive Manufacturing Technology: A Review, IEEE Access, 1 January 2020
  7. Visual Monitoring and Validation of Wire Arc Additive Manufacturing Deposition Using Deep Learning Under Low-Contrast Conditions, IEEE Transactions on Automation Science and Engineering, 1 January 2026
  8. Additive manufactured marine component – Ni Al bronze propeller, Procedia Structural Integrity (Elsevier BV), 1 January 2021

More on this topic

Additive manufacturing marine parts are moving from experiment to qualification. ABS and Radian Forge signed a joint development project in November 2026 to test whether digital manufacturing data can qualify metal components made by wire arc additive manufacturing. For ship repair yards, ship chandlers and port agents, the practical question is whether a printed spare part can be accepted at the next port call. The answer depends on class society rules and on keeping the digital build record with the part. Yards that price survey attendance into the PDA and confirm the acceptance route before quoting will answer repair enquiries faster. The technology has already been assessed for marine components in published research, including a nickel aluminium bronze propeller built by WAAM.

What is WAAM in ship repair? Wire arc additive manufacturing is a robotic welding process that builds metal parts layer by layer, and published research describes it as suited to large metal components with high deposition rates. What is ship repair and maintenance work changing? Repair specifications now need to say whether an additive route is proposed and who signs it off, with the digital build record kept alongside the part. Why does survey timing matter? A printed part is only usable at the port call if the class society surveyor accepts it, so survey attendance belongs in the PDA estimate, not just the part price.

The gate for additive manufacturing in ship repair is class acceptance, not the printing itself. ABS and Radian Forge are testing whether digital manufacturing data can prove a wire arc additive part meets class rules, so the build record becomes part of the part documentation. Until a surveyor accepts the route, a printed component does not shorten a port call, which is why repair specifications should name the acceptance route and the PDA should carry the survey attendance.

Classification acceptance decides whether an additively manufactured spare reaches a vessel in time. ABS and Radian Forge are testing digital qualification of wire arc additive manufacturing parts, while published research in Procedia Structural Integrity already assessed a nickel aluminium bronze propeller against class rules. For ship repair yards, ship chandlers and port agents, the surveyor's attendance belongs in the pro forma disbursement account alongside the part, and the digital build record travels with the documentation. Terminal equipment orders such as TTI Algeciras adding Kalmar hybrid straddle carriers create separate maintenance demand for marine service companies quoting port work.

This article was written with AI assistance from the sources listed above. Facts are linked to their original publishers; please consult the sources before acting on them.

additive manufacturingship repairWAAMclassificationspare parts
Chat on WhatsApp