LR2 Tankers Turn Dirty: Where Supplier Work Moves
Signal Ocean data show 74.2% of the LR2 fleet in dirty trade by 30 October 2026. What the clean-to-dirty shift means for bunker, slops and port work.
Three quarters of the LR2 fleet is now trading dirty, and that changes which port calls a supplier sees. According to Signal Ocean data reported by Hellenic Shipping News (November 2026), dirty employment accounted for 74.2% of the LR2 fleet on 30 October 2026, against 53.0% on 1 January 2025. The LR2 tanker market has therefore flipped from a clean-product fleet to a predominantly crude and dirty-products fleet in under two years.
The same report notes the shift accelerated during 2026, cutting the number of LR2s still trading clean. For a chandler, bunker supplier or port agent, the practical question is not the percentage. It is which cargo, which tank condition and which service a vessel needs when it arrives.
What changed in the LR2 fleet
An LR2 (a Long Range 2 tanker, typically around 110,000 to 115,000 deadweight tonnes) can carry clean petroleum products in coated tanks or dirty cargoes in uncoated ones. Switching between the two is a commercial decision made per voyage, not a permanent conversion.
- Clean share collapsed. Clean employment fell from roughly half the fleet at the start of 2025 to about a quarter by late October 2026, per the Signal Ocean figures.
- The move accelerated in 2026. The report describes a marked change in vessel employment since the start of 2025, with the pace picking up this year.
- The fleet itself grew. The headline of the reporting is a larger fleet but fewer LR2s trading clean, which means the absolute number of dirty-trading LR2s rose on both counts.
Read alongside the wider dry bulk picture, with the Baltic Dry Index up for a seventh straight session to 3,020 points according to the Baltic Exchange index reported by Hellenic Shipping News (November 2026), the point is that tonnage is being pushed around by freight economics rather than by any single trade lane.
Why a dirty LR2 is a different port call
A tanker arriving with dirty cargo or dirty tanks needs work a clean-product call does not. That difference is where supplier revenue sits.
- Tank cleaning and slops. A vessel moving from dirty back to clean trade must be cleaned and its slops landed ashore under MARPOL (the International Convention for the Prevention of Pollution from Ships, which governs waste reception at ports).
- Bunker stems and grades. Dirty-trading tonnage typically lifts heavier fuel grades, which changes the stem size and the barge requirement.
- Husbandry scope. Port agents handling these calls arrange more shore-side services, from sludge disposal to tank inspection support.
- Deck and cargo documentation. Cargo quality claims and tank condition records become part of the call file.
For chandlers, the deck and engine stores list on a dirty-trading LR2 leans towards cleaning chemicals, PPE and tank-related consumables rather than the product-handling items a clean carrier orders. Our guide to MARPOL waste reception work for chandlers and agents sets out what that scope involves.
The spill reminder: response work follows casualties
Tanker trade carries response obligations that suppliers are often first to be asked about. In the Philippines, the coast guard is cleaning up a spill from a sunken landing craft off northern Mindanao, with the response beginning at about 0522 on the day of the incident, according to The Maritime Executive (November 2026).
The same pattern appears in the Gulf. An oil spill from a damaged tanker off the United Arab Emirates widened, with satellite imagery from the European Union's Copernicus programme showing the spread and triggering further beach closures, MarineLink reported in October 2026.
Neither incident is an LR2 story. Both show what a port supplier is asked for when a casualty happens: booms, absorbents, workboats, storage and shore-side coordination at short notice. Detection and recovery are increasingly studied as an engineering problem rather than a manual one. A 2023 study in IEEE Access examined unmanned surface vehicles for port oil spill cleanup, noting that vessel traffic near congested ports makes spills frequent and that surveying and cleaning are labour-intensive tasks.
A separate 2023 paper in IEEE Journal of Selected Topics in Applied Earth Observations and Remote Sensing proposed a network for locating and segmenting oil spills from SAR satellite imagery, addressing the difficulty of extracting long, stripe-shaped spill areas.
What it means commercially for maritime service providers
The commercial effect is a change in the mix of calls, not a collapse in demand. Suppliers who track vessel employment rather than vessel count will see it first.
SegmentWhat the LR2 shift changesPractical response Bunker suppliersMore heavy-grade stems, fewer clean-product parcelsCheck the grade and barge plan against the vessel's current trade before quoting Ship chandlersStores lists move towards cleaning chemicals and PPEAsk about tank condition and last cargo when the enquiry arrives Port agentsWider husbandry scope per call, more shore-side coordinationBuild the PDA (pro forma disbursement account, the cost estimate sent to the owner before the call) from the actual service list Marine service companiesMore cleaning, slops and inspection supportKeep spill-response capacity visible to agents and terminalsTwo habits matter more in a shifting fleet. First, verify the trade the vessel is actually in when the stem or service request arrives, because a tanker can switch employment between voyages. Our note on when to re-quote a bunker stem covers how quickly that picture can change. Second, keep the enquiry pipeline moving before the vessel sails, since a dirty-trading LR2 on a short voyage gives less notice than a scheduled clean carrier.
How VesselReach helps
VesselReach, built by CatalystIQ, turns vessel movements at your chosen ports into conversations with the companies behind them, before the ship arrives.
- Vessel intelligence: see vessels near your target ports and scheduled arrivals, which means you can open a tank-cleaning or bunker conversation before the LR2 berths.
- AI company targeting and decision-maker discovery: the platform identifies the right company behind each vessel and finds roles such as technical superintendents, operations and procurement, which means your enquiry reaches someone who owns the decision.
- Multichannel outreach with AI enquiry handling: staged email, WhatsApp and phone contact, with AI answering routine questions from your approved information and escalating to your team when it cannot, which means fewer enquiries go unanswered.
Book a VesselReach demo to see the workflow on your own ports, with a 10-day free trial offered after the meeting.
Frequently asked questions
What does it mean when an LR2 turns dirty?
The tanker is employed carrying crude or dirty products instead of clean petroleum products. Signal Ocean data reported by Hellenic Shipping News show 74.2% of the LR2 fleet in dirty employment on 30 October 2026, up from 53.0% on 1 January 2025.
Does a dirty-trading LR2 need different port services?
Yes. Dirty trade typically brings heavier bunker grades, tank cleaning and slops landing, and a wider husbandry scope for the port agent, so the service list and PDA differ from a clean-product call.
How should a chandler prepare for more dirty tanker calls?
Ask about last cargo and tank condition when an enquiry arrives, and stock towards cleaning chemicals, PPE and tank-related consumables rather than clean-product handling items.
Who handles oil spill response at a port?
Response is coordinated by authorities such as the coast guard, as in the Philippine sinking off northern Mindanao reported by The Maritime Executive, with suppliers providing booms, absorbents, workboats and shore-side support.
Can software help find these tanker calls earlier?
VesselReach shows vessels near your ports and expected arrivals, identifies the company behind each vessel and the relevant decision-makers, then runs staged outreach so the conversation starts before the vessel berths.
Key facts
- According to Signal Ocean data reported by Hellenic Shipping News (November 2026), dirty employment accounted for 74.2% of the LR2 fleet on 30 October 2026, against 53.0% on 1 January 2025. Hellenic Shipping News
- According to the Baltic Exchange index reported by Hellenic Shipping News (November 2026), the Baltic Dry Index rose for a seventh straight session to 3,020 points. Hellenic Shipping News
- According to The Maritime Executive (November 2026), the Philippine coast guard is cleaning up a spill from a sunken landing craft off northern Mindanao, with the response beginning at about 0522 on the day of the incident. The Maritime Executive
- MarineLink reported in October 2026 that an oil spill from a damaged tanker off the United Arab Emirates widened, with Copernicus satellite imagery showing the spread and triggering further beach closures. MarineLink
- A 2023 study in IEEE Access examined unmanned surface vehicles for port oil spill cleanup, noting that vessel traffic near congested ports makes spills frequent and that surveying and cleaning are labour-intensive tasks. IEEE Access
Frequently asked questions
What does it mean when an LR2 tanker turns dirty?
An LR2 turning dirty means the tanker is employed carrying crude or dirty products instead of clean petroleum products. Signal Ocean data reported by Hellenic Shipping News show 74.2% of the LR2 fleet in dirty employment on 30 October 2026, up from 53.0% on 1 January 2025. Source: Hellenic Shipping News
What is an LR2 tanker?
An LR2 is a Long Range 2 tanker of roughly 110,000 to 115,000 deadweight tonnes. An LR2 can carry clean petroleum products in coated tanks or dirty cargoes in uncoated tanks, and switching between the two is a commercial decision made per voyage rather than a permanent conversion.
How much notice does a dirty-trading LR2 give before arrival compared with a clean carrier?
Less notice. A dirty-trading LR2 on a short voyage gives a supplier less warning than a scheduled clean carrier, so the enquiry pipeline has to move before the vessel sails. Verify the trade the vessel is actually in when the stem or service request arrives, because a tanker can switch employment between voyages.
Does a dirty-trading LR2 need different port services?
Yes. Dirty trade typically brings heavier bunker grades, tank cleaning and slops landed ashore under MARPOL, and a wider husbandry scope for the port agent, so the service list and pro forma disbursement account differ from a clean-product call.
How should a ship chandler prepare for more dirty tanker calls?
Ask about last cargo and tank condition when an enquiry arrives, and stock towards cleaning chemicals, PPE and tank-related consumables rather than clean-product handling items. Deck and engine stores lists on a dirty-trading LR2 lean towards tank-related consumables.
Who handles oil spill response at a port?
Response is coordinated by authorities such as the coast guard, as in the Philippine sinking off northern Mindanao reported by The Maritime Executive, with suppliers providing booms, absorbents, workboats, storage and shore-side support at short notice. Source: The Maritime Executive
Sources
- Philippine Coast Guard Cleans Up Spill From Sunken LCT, The Maritime Executive, 13 November 2026
- LR2s Turn Dirty: A larger fleet, but fewer LR2s trading clean, Hellenic Shipping News, 12 November 2026
- Baltic Dry Index Advances for 7th Day, Hellenic Shipping News, 12 November 2026
- Damaged Tanker Leaks Oil Across UAE Waters as Spill Widens, MarineLink, 28 October 2026
- USV Port Oil Spill Cleanup Using Hybrid Multi-Destination RL-CPP, IEEE Access, 1 January 2023
- Multifeature Semantic Complementation Network for Marine Oil Spill Localization and Segmentation Based on SAR Images, IEEE Journal of Selected Topics in Applied Earth Observations and Remote Sensing, 1 January 2023
The LR2 tanker market has moved decisively towards dirty trade. Signal Ocean figures reported in November 2026 put dirty employment at 74.2% of the LR2 fleet on 30 October 2026, against 53.0% at the start of 2025. For a ship chandler, bunker supplier or port agent, that means more heavy-grade stems, more tank cleaning and slops work, and a wider husbandry scope per call. Ask about last cargo and tank condition when an enquiry lands, and build the pro forma disbursement account from the real service list. Tanker casualties also bring response work, as the Philippine landing craft spill and the UAE tanker spill show, so keep booms, absorbents and workboat capacity visible to agents.
What is an LR2 tanker? An LR2 is a Long Range 2 tanker of about 110,000 to 115,000 deadweight tonnes that can carry clean products in coated tanks or dirty cargoes in uncoated ones. What is bunkering on a ship? Bunkering is the delivery of fuel to a vessel, and a dirty-trading LR2 typically lifts heavier grades, which changes the stem size and the barge requirement. Which LR2 calls need tank cleaning? A vessel moving from dirty back to clean trade must be cleaned and its slops landed ashore under MARPOL, so ask about last cargo and tank condition when the enquiry arrives.
The most useful point for a supplier is that the LR2 fleet's trade mix changed faster than the fleet itself. Signal Ocean data reported by Hellenic Shipping News show dirty employment at 74.2% on 30 October 2026 against 53.0% on 1 January 2025, so most LR2 calls now arrive with dirty cargo or dirty tanks. That shifts the enquiry towards heavier bunker grades, tank cleaning and slops landing under MARPOL, and a wider husbandry scope for the port agent. Verify the vessel's current trade before quoting, because employment can change between voyages.
An LR2 tanker is a Long Range 2 product tanker of roughly 110,000 to 115,000 deadweight tonnes, and it can carry clean petroleum products in coated tanks or dirty cargoes in uncoated ones. Signal Ocean data reported by Hellenic Shipping News put dirty employment at 74.2% of the fleet on 30 October 2026, so most LR2 port calls now arrive with dirty cargo or dirty tanks. That brings heavier bunker grades, tank cleaning and slops landed ashore under MARPOL, and a wider husbandry scope for the port agent building the pro forma disbursement account. VesselReach, built by CatalystIQ, shows vessels due at your ports so the enquiry starts before the ship berths.
This article was written with AI assistance from the sources listed above. Facts are linked to their original publishers; please consult the sources before acting on them.
